Container room is a new type of activity room, the introduction of modern home design concept, the use of steel, sandwich board, aluminum alloy, ceramic tile, glass, paint and other materials through the standard process refined into an integrated activity room, with ready to use, anytime, anywhere, anytime, recycling, recycling, environmental protection, beautiful, economic, fast, and other characteristics. Therefore, once the product is available, it is sought after by the market, which can be described as the successor of the traditional activity board house.
Moisture is several major problems of the mobile room, because some cotton sandwich, so the problem of moisture must be well solved, in fact, good moisture effect should rely on the wall construction of the mobile room. Therefore, the following points for attention are proposed for these shortcomings of the mobile room:
- The transverse connection between the cotton and the cotton is connected together by the method of stapling on the veneer flash.
- The glass wool edge, install the wall color steel plate;
- Cut off the glass wool roll felt at 20 cm beyond the wall * purlin and fix it with double-sided tape.
- The veneer faces the interior side, roll from the eaves to the corner, and fix the glass roll felt on the purlin at the lower end with double-sided tape, leaving 20 cm more.
In addition, when the construction of the mobile house should also be based on the needs of the project, in order to avoid the generation of cold Bridges, the roof construction can consider some hard insulation materials on the purlin. When installing, keep the tensioning, alignment, seam between the roll and the roll tight, and when the longitudinal need to lap, the lap should be arranged in the purlin. The moisture problem of the above mobile room will be solved, and the mobile room will be more comfortable and accepted by the wider masses.
Matters needing attention
- According to the needs of the project, in order to avoid the generation of cold Bridges, the roof construction can consider some hard insulation materials on the purlin.
- When installing, keep the tensioning, alignment, seam between the roll and the roll tight. When the longitudinal lap is required, the lap should be arranged in the purlin.
The container frame includes four columns, upper and lower beams, and heavy beams on the floor are made of channel steel structure, the walls and ceiling are made of color steel sandwich panels, the floor is laid with ceramic tiles, double open convection push-pull aluminum alloy glass Windows, stainless steel anti-raid net, water and electricity, air conditioning frame and other living facilities are in place